SGI Origin2000 8xR10000 250Mhz Deskside
[SGI Codename: Lego, LegoKego, Speedo]
Finally got one!!
After many lost auctions, or too high ending prices I got my Origin 2000 Deskside.
this one arrives from UK and went bought with 4x250Mhz R10000 cpu, then I bought
(not arrived yet) 4 more cpu (2 nodeboards) and it'll become a 8 cpu server.
I'm also planning to upgrade it to r12000 350mhz cpu.
Here's some pitures of this long waited dream. :)
April 21, 2oo5
I added a SI+Tram graphics boards but it seams not working yet, I just have blank output.
Anyway it might be a problem of missing (yet) keyboards and mouse, that I'll fix
when I'll receive the XIO PCI Xtalk board to host a CadDuo (Keyboard+Mouse+Ethernet)
board.
Let's hope :)
April 23, 2oo5
IT WORKED!
here's a little report of the steps that made this possible but keep tuned because
tomorrow I'm going to fit in a presenter board as well.
the final report will be in my tech page with pictures and a detailed "how to"
cheers.
May 27, 2oo5
UPDATE!
full routers boards finally arrived so now i'm running a 8 cpu R10k 250 Mhz. sadly i lost some memory that apparently went to dead
so i need to find more memory for this machine. Later :)
cheers.
here's the output of the command "hinv -vm"
Location: /hw/module/1/slot/n1/node
MODULEID Board: barcode K0014652 part rev
IP31 Board: barcode HJR279 part 030-1255-003 rev B
IP31PIMM Board: barcode HTZ525 part 030-1313-002 rev A
8P12_MPLN Board: barcode FXV293 part 030-0762-006 rev H
Location: /hw/module/1/slot/n2/node
IP31 Board: barcode HXV881 part 030-1255-003 rev B
IP31PIMM Board: barcode HXG265 part 030-1313-002 rev A
Location: /hw/module/1/slot/n3/node
IP31 Board: barcode HXE193 part 030-1255-003 rev D
IP31PIMM Board: barcode HXF721 part 030-1313-002 rev A
Location: /hw/module/1/slot/n4/node
IP31 Board: barcode HXF267 part 030-1255-003 rev D
IP31PIMM Board: barcode HXH180 part 030-1313-002 rev A
Location: /hw/module/1/slot/r1/router
ROUTER-IR1 Board: barcode FEJ144 part 030-0841-002 rev G
Location: /hw/module/1/slot/r2/router
ROUTER-IR1 Board: barcode DZP564 part 030-0841-002 rev G
Location: /hw/module/1/slot/io4/mscsi
MSCSI Board: barcode HPY598 part 030-1243-001 rev M
Location: /hw/module/1/slot/io6/mscsi
MSCSI Board: barcode HRW665 part 030-1243-001 rev M
Location: /hw/module/1/slot/io8/menet
MENET Board: barcode HLZ655 part 030-0873-003 rev J
Location: /hw/module/1/slot/io7/menet
MENET Board: barcode FLZ214 part 030-0873-003 rev C
Location: /hw/module/1/slot/io1/baseio
BASEIO Board: barcode HSG733 part 030-1124-002 rev M
Location: /hw/module/1/slot/io5/mgras
GM10 Board: barcode GFX215 part 030-0938-003 rev U
Location: /hw/module/1/slot/io9/xtalk_pci
XTALK_PCI Board: barcode MGC475 part 030-1275-004 rev A
Location: /hw/module/1/slot/io3/xtalk_pci
XTALK_PCI Board: barcode KHK183 part 030-1275-003 rev A
Location: /hw/module/1/slot/io3/xtalk_pci/pci/1
PCI_ENET Board: barcode HKV898 part 030-1155-002 rev D
8 250 MHZ IP27 Processors
CPU: MIPS R10000 Processor Chip Revision: 3.4
FPU: MIPS R10010 Floating Point Chip Revision: 3.4
CPU 0 at Module 1/Slot 1/Slice A: 250 Mhz MIPS R10000 Processor Chip (enabled)
Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz Tap 0x9
CPU 1 at Module 1/Slot 1/Slice B: 250 Mhz MIPS R10000 Processor Chip (enabled)
Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz Tap 0x9
CPU 2 at Module 1/Slot 2/Slice A: 250 Mhz MIPS R10000 Processor Chip (enabled)
Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz Tap 0x9
CPU 3 at Module 1/Slot 2/Slice B: 250 Mhz MIPS R10000 Processor Chip (enabled)
Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz Tap 0x9
CPU 4 at Module 1/Slot 3/Slice A: 250 Mhz MIPS R10000 Processor Chip (enabled)
Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz Tap 0x9
CPU 5 at Module 1/Slot 3/Slice B: 250 Mhz MIPS R10000 Processor Chip (enabled)
Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz Tap 0x9
CPU 6 at Module 1/Slot 4/Slice A: 250 Mhz MIPS R10000 Processor Chip (enabled)
Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz Tap 0x9
CPU 7 at Module 1/Slot 4/Slice B: 250 Mhz MIPS R10000 Processor Chip (enabled)
Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz Tap 0x9
Main memory size: 896 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Memory at Module 1/Slot 1: 512 MB (enabled)
Bank 0 contains 512 MB (Standard) DIMMS (enabled)
Memory at Module 1/Slot 2: 128 MB (enabled)
Bank 0 contains 128 MB (Standard) DIMMS (enabled)
Bank 1 contains 128 MB (Standard) DIMMS (disabled)
Memory at Module 1/Slot 3: 128 MB (enabled)
Bank 0 contains 128 MB (Standard) DIMMS (enabled)
Memory at Module 1/Slot 4: 128 MB (enabled)
Bank 0 contains 128 MB (Standard) DIMMS (enabled)
ROUTER in Module 1/Slot 2: Revision 2: Active Ports [4,5,6] (enabled)
ROUTER in Module 1/Slot 4: Revision 2: Active Ports [4,5,6] (enabled)
Integral SCSI controller 2: Version QL1040B (rev. 2), differential
Integral SCSI controller 3: Version QL1040B (rev. 2), differential
Integral SCSI controller 4: Version QL1040B (rev. 2), differential
Integral SCSI controller 5: Version QL1040B (rev. 2), differential
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
CDROM: unit 6 on SCSI controller 0
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
Integral SCSI controller 6: Version QL1040B (rev. 2), differential
Integral SCSI controller 9: Version QL1040B (rev. 2), differential
Integral SCSI controller 7: Version QL1040B (rev. 2), differential
Integral SCSI controller 8: Version QL1040B (rev. 2), differential
IOC3/IOC4 serial port: tty9
IOC3/IOC4 serial port: tty10
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
IOC3/IOC4 serial port: tty11
IOC3/IOC4 serial port: tty12
IOC3/IOC4 serial port: tty5
IOC3/IOC4 serial port: tty6
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3/IOC4 serial port: tty13
IOC3/IOC4 serial port: tty14
IOC3/IOC4 serial port: tty7
IOC3/IOC4 serial port: tty8
Graphics board: SI with texture option
Fast Ethernet: ef7, version 1, module 1, slot io8, pci 0
Fast Ethernet: ef2, version 1, module 1, slot io7, pci 0
Fast Ethernet: ef8, version 1, module 1, slot io8, pci 1
Fast Ethernet: ef9, version 1, module 1, slot io8, pci 2
Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2
Fast Ethernet: ef10, version 1, module 1, slot io8, pci 3
Fast Ethernet: ef4, version 1, module 1, slot io7, pci 2
Fast Ethernet: ef5, version 1, module 1, slot io7, pci 3
Fast Ethernet: ef1, version 1, module 1, slot io3, pci 1
Iris Audio Processor: version RAD revision 13.0, number 2
Origin MSCSI board, module 1 slot 4: Revision 4
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 3
Origin MSCSI board, module 1 slot 6: Revision 4
Origin MENET board, module 1 slot 8: Revision 4
Origin MENET board, module 1 slot 7: Revision 3
Origin BASEIO board, module 1 slot 1: Revision 4
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 0
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 3
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 0
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 3
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 1
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 3
IOC3/IOC4 external interrupts: 1
HUB in Module 1/Slot 1: Revision 5 Speed 100.00 Mhz (enabled)
HUB in Module 1/Slot 2: Revision 5 Speed 100.00 Mhz (enabled)
HUB in Module 1/Slot 3: Revision 5 Speed 100.00 Mhz (enabled)
HUB in Module 1/Slot 4: Revision 5 Speed 100.00 Mhz (enabled)
IP27prom in Module 1/Slot n1: Revision 6.156
IP27prom in Module 1/Slot n2: Revision 6.156
IP27prom in Module 1/Slot n3: Revision 6.156
IP27prom in Module 1/Slot n4: Revision 6.156
IO6prom on Global Master Baseio in Module 1/Slot io1: Revision 6.156
here's the output of the command "/usr/gfx/gfxinfo -v"
Graphics board 0 is "IMPACTSR" graphics.
Managed (":0.0") 1280x1024
Product ID 0x2, 1 GE, 1 RE, 4 TRAMs
MGRAS revision 1, RA revision 0
HQ rev B, GE11 rev B, RE4 rev C, PP1 rev A,
VC3 rev A, CMAP rev E
unknown, assuming 19" monitor (id 0xf)
Input Sync: Voltage - Video Level; Source - Internal; Genlocked - False
Channel 0:
Origin = (0,0)
Video Output: 1280 pixels, 1024 lines, 60.00Hz (1280x1024_60)
Video Format Flags: (none)
Sync Disabled
Using Gamma Map 0
here's the output of the command "df -hk"
Filesystem Type Size use avail %use Mounted on
/dev/root xfs 17G 2.2G 15G 14% /
/dev/dsk/dks0d2s7 xfs 17G 288K 17G 1% /GARBAGE1
/dev/dsk/dks0d3s7 xfs 17G 288K 17G 1% /GARBAGE2
usefull related links
Jean-Claude Nouchy :: original website date : sometime around 2001 ][ updated : October 16th, 2021 GMT