The Origin200 is a server computer, it have no video card, nor ports for keyboard or mouse.
My configuration is a Craylinked configuration that means tweo modules (O200 servers) that 
are connected from the Cray link, and they become ONE single unit. That's why
the information about my Origin (hinv) says that the system have 4 CPU, 2 for each module.
This is not to be confused with Clustering or Renderfarm of any type. 
This system is a SINGLE sistem. CRAY was a company included in the SGI family, 
and Craylinked system was "array" of modules that acts like a single super computer.

The Origin200 was my main server at home, until i found that is very loud and annoying to get in my
computer room where all other computers are, after a while I'm working on my octane, 
it seams i'm inside an airplane, so I now use the ChallengeS 
as my main server for 24/7 services until i'll  find a proper appartment 
with a proper "Server room" :)

the Origin VAULT shown in picture became my Octane2 Storage filesystem, 
so is now close to the Octane2 and i don't use it with the Origin200 anymore.

I recently added the XBOX card... that lets me connect the GIGAchannel box.
its a case that is like an Origin200 but it "just" have expansions slots for 
XIO and PCI cards. I didn't found a GIGAChannel yet in good shape condition,
but I'm planning to add this box as well to my config."

Location: /hw/module/1/slot/MotherBoard/node
  PIMM_270_4M_2P Board: barcode JEK629     part 013-2511-001 rev  C
Location: /hw/module/1/slot/MotherBoard/node/xtalk/8
            IP29 Board: barcode DDY826     part 030-1389-001 rev  A
Location: /hw/module/1/slot/MotherBoard/node/xtalk/8/pci/2
Location: /hw/module/1/slot/MotherBoard/node/xtalk/8/pci/6
        PCI_ENET Board: barcode HKV898     part 030-1155-002 rev  D
Location: /hw/module/2/slot/MotherBoard/node
  PIMM_270_4M_2P Board: barcode JHF619     part 013-2511-001 rev  D
Location: /hw/module/2/slot/MotherBoard/node/xtalk/8
        XBOX_EXT Board: barcode HLB782     part 030-1264-001 rev  C
            IP29 Board: barcode KAA242     part 030-1389-002 rev  A
Location: /hw/module/2/slot/MotherBoard/node/xtalk/8/pci/2
4 270 MHZ IP27 Processors
CPU: MIPS R12000 Processor Chip Revision: 2.3
FPU: MIPS R12010 Floating Point Chip Revision: 2.3
CPU 0 at Module 1/Slot 1/Slice A: 270 Mhz MIPS R12000 Processor Chip (enabled) 
  Processor revision: 2.3. Scache: Size 4 MB Speed 180 Mhz  Tap 0x9
CPU 1 at Module 1/Slot 1/Slice B: 270 Mhz MIPS R12000 Processor Chip (enabled) 
  Processor revision: 2.3. Scache: Size 4 MB Speed 180 Mhz  Tap 0x9
CPU 2 at Module 2/Slot 2/Slice A: 270 Mhz MIPS R12000 Processor Chip (enabled) 
  Processor revision: 2.3. Scache: Size 4 MB Speed 180 Mhz  Tap 0x9
CPU 3 at Module 2/Slot 2/Slice B: 270 Mhz MIPS R12000 Processor Chip (enabled) 
  Processor revision: 2.3. Scache: Size 4 MB Speed 180 Mhz  Tap 0x9
Main memory size: 3072 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Memory at Module 1/Slot 1: 2048 MB (enabled)
  Bank 0 contains 512 MB (Standard) DIMMS (enabled)
  Bank 1 contains 512 MB (Standard) DIMMS (enabled)
  Bank 2 contains 512 MB (Standard) DIMMS (enabled)
  Bank 3 contains 512 MB (Standard) DIMMS (enabled)
Memory at Module 2/Slot 2: 1024 MB (enabled)
  Bank 0 contains 256 MB (Standard) DIMMS (enabled)
  Bank 1 contains 512 MB (Standard) DIMMS (enabled)
  Bank 2 contains 256 MB (Standard) DIMMS (enabled)
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  Disk drive: unit 2 on SCSI controller 0 (unit 2) (XVM Local Disk) (primary path)
  Disk drive: unit 3 on SCSI controller 0 (unit 3) (XVM Local Disk) (primary path)
  Disk drive: unit 4 on SCSI controller 0 (unit 4) (XVM Local Disk) (primary path)
  Disk drive: unit 5 on SCSI controller 0 (unit 5) (XVM Local Disk) (primary path)
  Disk drive: unit 6 on SCSI controller 0 (unit 6) (XVM Local Disk) (primary path)
Integral SCSI controller 2: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 2 (unit 1) (XVM Local Disk) (primary path)
  Disk drive: unit 2 on SCSI controller 2 (unit 2) (XVM Local Disk) (primary path)
  Disk drive: unit 3 on SCSI controller 2 (unit 3) (XVM Local Disk) (primary path)
  Disk drive: unit 4 on SCSI controller 2 (unit 4) (XVM Local Disk) (primary path)
  Disk drive: unit 5 on SCSI controller 2 (unit 5) (XVM Local Disk) (primary path)
  Disk drive: unit 6 on SCSI controller 2 (unit 6) (XVM Local Disk) (primary path)
Integral SCSI controller 3: Version QL1040B (rev. 2), single ended
  CDROM: unit 7 on SCSI controller 3
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
  CDROM: unit 1 on SCSI controller 1
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
IOC3 parallel port: plp1
IOC3 parallel port: plp2
Integral Fast Ethernet: ef0, version 1, module 1, slot MotherBoard, pci 2
Fast Ethernet: ef1, version 1, module 1, slot MotherBoard, pci 6
Fast Ethernet: ef2, version 1, module 2, slot MotherBoard, pci 2
Gigabit Ethernet: eg1, module 2, PCI slot 6, firmware version 0.0.0
Origin 200 base I/O, module 1 slot 1
Origin 200 base I/O, module 2 slot 2
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 6
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0009) PCI slot 6
IOC3/IOC4 external interrupts: 1
IOC3/IOC4 external interrupts: 2
HUB in Module 1/Slot 1: Revision 5 Speed 90.00 Mhz (enabled)
HUB in Module 2/Slot 2: Revision 5 Speed 90.00 Mhz (enabled)
IP27prom in Module 1/Slot n1: Revision 6.156
IP27prom in Module 2/Slot n2: Revision 6.156
				

Filesystem             Type  Size   use  avail  %use  Mounted on
/dev/root               xfs  8,3G  8,2G   145M   99%  /
/dev/lxvm/stripe2       xfs  102G  102G    26M  100%  /stripe2
/dev/lxvm/datadisk      xfs  170G  156G    13G   93%  /datadisk
/dev/lxvm/stripe1       xfs   51G   29G    22G   58%  /UPLOADS